Complete 200W 220V solar storage system
"Solar200-1"
The solar storage system, which has been completely prepared for connection, can be used in any position thanks to the 2x 230V sockets of the 1000W voltage transformer. The solar modules have tempered glass and a reinforced frame for high stability and durability. These come standard with TÜV certification and monocrystalline high-performance quality solar cells. This gives you even higher efficiency! With the included 100Ah solar battery, you can have your electricity at night or when the sun is not shining. All components are delivered completely ready for connection, so that a simple wiring in the included carrying box is possible.
delivery
2x 100W high performance solar module monocrystalline Hanover Solar GmbH, tempered glass (TÜV / IEC / CE) 119,5x54,5x3cm
100Ah (C100) quality solar battery (maintenance-free, closed) for up to 15 hours of television (IEC / EN)
1000W quality voltage transformer with two 220V outlets (CE / RoHS / ISO9001: 2000)
Two 220V / 230V sockets for the operation of devices up to 1000W and up to 2000W start-up currents (20ms) (Please note: The operating time depends on the battery / solar panel power)
(can also be replaced with another model)
Charge Controller 20A (expandable for up to two modules) (CE / ISO9001)
on request also with LCD display without surcharge
Solar connection cable buriable, UV resistant, weatherproof 2x 5m incl. Pluggable MC4 plugs (can also be extended on request)
Battery connection cable incl. Charge controller connection cable with integrated, professionally assembled fuse
Y-connector
2x solar diode plug
Battery pole protection covers for your safety
Carrying box in which all components can be wired
operating manual
Fully ready for connection! Plug and Play.
Expandable by additional solar module or solar battery.
Including easy-to-understand connection instructions!
solar module
Power: 2x 100W
Module type: Monocrystalline
Certificates: TÜV / CE / ISO
Junction box: Weatherproof IP65
robust, reinforced aluminum frame
Rated current Impp: 5.39A
Rated voltage: Umpp: 18.7V
Short circuit current: Isc: 5.87A
Open circuit voltage Uoc: 21.6V
Weight: 7,8kg
Dimensions: 120.5 x 54.5 x 3.5cm
Temperature range: -40 ° C to 80 ° C
weatherproof safety glass hardened / protection against hail, snow, ice
DC converter
Power: 1000W and 2000W start-up currents (20ms)
Certificates: CE / RoHS / ISO9001: 2000
Connection: 2x 220V / 230V Schuko sockets
1x USB port
Output voltage: 230V (50Hz)
Input voltage: 12V
Weight: 2.5kg
Dimensions: 27.1 x 20.8 x 7.5 cm
Temperature range: -40 ° C to 80 ° C
Cooling: active cooling by 2 fans
Efficiency: typically approx. 92%
Type. Self-consumption when switched on without load: 4W (0.3A)
Average self-consumption in the off state 0 watts
modified tension
Automatic shutdown in case of overload or short circuit
Reverse polarity protection for battery (fuse triggers)
Sturdy housing made of aluminum and molded sheet
solar battery
Capacity: 100 Ah
Certificates: IEC / EN
Voltage: 12V
Cold test current (EN): 680A
Weight: approx. 18.5 kg
Dimensions: 27.8 cm x 17.5 cm x H: 19 cm
Temp. Range: - 42 ° C to 60 ° C
Labyrinth lid prevents electrolyte loss!
Very deep cycle battery
High performance due to stretched grid plates
Calcium technology
Long service life even with frequent charge / discharge cycles
SMF (Sealed Maintenance Free) absolutely maintenance-free
Very robust and shakeproof
charge controller
Electricity: 20A
Certificates: CE / ISO
Power: up to 240W
Voltage: 12V or 24V
Display: LED display or alternatively with LCD display