9480W solar system Solar10000-HV36 For self-consumption / feeding into your existing power grid incl. 6.1kWh storage and VDE-AR-N 4105 Total power/nominal power up to 9480Watt peak!

scope of delivery

24x 395W high-performance solar module 9.48kW peak power (TÜV/IEC/CE) quality module from Trina Solar monocrystalline half-cut (175x109x3.0cm) (latest technology!)

or optionally at no extra charge if available 370W monocrystalline (176x104x3.0cm) or 400W monocrystalline (172x113x3.0cm)

1x three-phase Hybrid Solax inverter 10kW X3-Hybrid-10.0-D G4 incl. ENS VDE-AR-N 4105 shutdown device, storable! and capable of emergency power! Integrated safety DC circuit breaker

1x USB stick for a WLAN interface (to read out the solar yield data via the supplied software)

High-voltage storage system from Solax 6.1kWh

2x Solax Triple Power battery T30
1x Solax Master Box MC0600 that manages the storage
1x 3-phase counter DTSU for communication

4x 15 meter high-performance solar cable 6mm² incl. pre-assembled MC4 connectors (other lengths also available)

operating manual Network application documents Declaration of Conformity Data Sheets Declaration of No Objection The legally required release device ENS VDE-AR-N 4105 is integrated in the inverter. (Legally required automatic switch-off)

The system can be expanded with a so-called EPS box, which automatically switches off the public grid in the event of a power failure and consumers can continue to be operated with the solar system and the storage tank. In this case, the solar system will continue to charge the storage tank.

The Wi-Fi Wireless Stick is used for efficient remote monitoring of PV systems. It collects information from the inverter, such as status and performance.

Storage: LiFePo4 storage Operating temperature: -30-+50°c Up to 6000 cycles Nominal capacity (kWh): 6.1 Usable capacity (kWh): 5.58 Charging and discharging power (kW): 6.1 Voltage (V): 204.8 Max Discharge Current (A): 60 Max. charge current (A): 60

Hybrid Inverter: - Can be operated completely independently with an additional EPS box in the event of a power failure - Safe & reliable with software and hardware protection - Efficiency max. 98.5%, Euro efficiency up to 98% of the inverter - Wide MPPT voltage range & Two independent MPP trackers - High protection class IP65 (indoor/outdoor use) - Multiple protections: over-voltage/under-voltage, grounding, anti-islanding, overload, over-temperature and RCD etc.

External overvoltage protection is recommended and can be ordered on request.

Available from Phoenix Contact or Raycap.

You will receive an invoice including VAT

9480W solar system Solar10000-HV36 For self-consumption / feeding into your existing power grid incl. 6.1kWh storage and VDE-AR-N 4105 Total power/nominal power up to 9480Watt peak!

scope of delivery

24x 395W high-performance solar module 9.48kW peak power (TÜV/IEC/CE) quality module from Trina Solar monocrystalline half-cut (175x109x3.0cm) (latest technology!)

or optionally at no extra charge if available 370W monocrystalline (176x104x3.0cm) or 400W monocrystalline (172x113x3.0cm)

1x three-phase Hybrid Solax inverter 10kW X3-Hybrid-10.0-D G4 incl. ENS VDE-AR-N 4105 shutdown device, storable! and capable of emergency power! Integrated safety DC circuit breaker

1x USB stick for a WLAN interface (to read out the solar yield data via the supplied software)

High-voltage storage system from Solax 6.1kWh

2x Solax Triple Power battery T30
1x Solax Master Box MC0600 that manages the storage
1x 3-phase counter DTSU for communication

4x 15 meter high-performance solar cable 6mm² incl. pre-assembled MC4 connectors (other lengths also available)

operating manual Network application documents Declaration of Conformity Data Sheets Declaration of No Objection The legally required release device ENS VDE-AR-N 4105 is integrated in the inverter. (Legally required automatic switch-off)

The system can be expanded with a so-called EPS box, which automatically switches off the public grid in the event of a power failure and consumers can continue to be operated with the solar system and the storage tank. In this case, the solar system will continue to charge the storage tank.

The Wi-Fi Wireless Stick is used for efficient remote monitoring of PV systems. It collects information from the inverter, such as status and performance.

Storage: LiFePo4 storage Operating temperature: -30-+50°c Up to 6000 cycles Nominal capacity (kWh): 6.1 Usable capacity (kWh): 5.58 Charging and discharging power (kW): 6.1 Voltage (V): 204.8 Max Discharge Current (A): 60 Max. charge current (A): 60

Hybrid Inverter: - Can be operated completely independently with an additional EPS box in the event of a power failure - Safe & reliable with software and hardware protection - Efficiency max. 98.5%, Euro efficiency up to 98% of the inverter - Wide MPPT voltage range & Two independent MPP trackers - High protection class IP65 (indoor/outdoor use) - Multiple protections: over-voltage/under-voltage, grounding, anti-islanding, overload, over-temperature and RCD etc.

External overvoltage protection is recommended and can be ordered on request.

Available from Phoenix Contact or Raycap.

You will receive an invoice including VAT

15000W solar system Solar10000-HV36 For self-consumption / feeding into your existing power grid incl. 17,4kWh storage and VDE-AR-N 4105 Total power/nominal power up to 15000Watt peak!

scope of delivery

38x 405W high-performance solar module 15kW peak power (TÜV/IEC/CE) quality module from Trina Solar monocrystalline half-cut (175x109x3.0cm) (latest technology!)

or optionally at no extra charge 375W monocrystalline (176x104x3.0cm) Made in Germany (172x113x3.0cm)

1x three-phase Hybrid Solax inverter 15kW X3-Hybrid-15.0-D G4 incl. ENS VDE-AR-N 4105 shutdown device, storable! and capable of emergency power! Integrated safety DC circuit breaker

1x USB stick for a WLAN interface (to read out the solar yield data via the supplied software)

High-voltage storage system from Solax 6.1kWh

2x Solax Triple Power battery T30
1x Solax Master Box MC0600 that manages the storage
1x 3-phase counter DTSU for communication

4x 15 meter high-performance solar cable 6mm² incl. pre-assembled MC4 connectors (other lengths also available)

operating manual Network application documents Declaration of Conformity Data Sheets Declaration of No Objection The legally required release device ENS VDE-AR-N 4105 is integrated in the inverter. (Legally required automatic switch-off)

The system can be expanded with a so-called EPS box, which automatically switches off the public grid in the event of a power failure and consumers can continue to be operated with the solar system and the storage tank. In this case, the solar system will continue to charge the storage tank.

The Wi-Fi Wireless Stick is used for efficient remote monitoring of PV systems. It collects information from the inverter, such as status and performance.

Storage: LiFePo4 storage Operating temperature: -30-+50°c Up to 6000 cycles Nominal capacity (kWh): 6.1 Usable capacity (kWh): 5.58 Charging and discharging power (kW): 6.1 Voltage (V): 204.8 Max Discharge Current (A): 60 Max. charge current (A): 60

Hybrid Inverter: - Can be operated completely independently with an additional EPS box in the event of a power failure - Safe & reliable with software and hardware protection - Efficiency max. 98.5%, Euro efficiency up to 98% of the inverter - Wide MPPT voltage range & Two independent MPP trackers - High protection class IP65 (indoor/outdoor use) - Multiple protections: over-voltage/under-voltage, grounding, anti-islanding, overload, over-temperature and RCD etc.

External overvoltage protection is recommended and can be ordered on request.

Available from Phoenix Contact or Raycap.

You will receive an invoice including VAT

3700W Hybrid Solaranlage Solar3700-HN1Li30

Zur Eigenverbrauchsoptimierung inkl. 3kWh Speicher und Einspeisung des Überschusses.

Gesamtleistung/Nennleistung bis zu 4050 Watt Peak! 

Bei der hier angebotenen Solaranlage handelt es sich um eine Hybrid Anlage die zusätzlich zur Speicherfunktion überschüssigen Strom ins öffentliche Netzeinspeisen kann. Es besteht die Möglichkeit diese Solaranlage mit und ohne Speicher zu betreiben.
Der Lithiumspeicher lässt sich durch einfaches parallel schalten weiterer Batteriespeichermodule erweitern.

---

Grundprinzip

Der Hybrid Wechselrichter lädt standardmäßig die angeschlossenen Lithium-Akkus und speist bei Bedarf überschüssigen Strom in das angeschlossene einphasige Netz oder in das öffentliche Netz. Dabei wird primär der Strom der Solarmodule verwendet.

Sobald keine Sonne mehr zur Verfügung steht wird die Energieentnahme auf die Lithium-Akkus umgestellt. Sollten die Lithium-Akkus entladen sein bzw. keine Solarenergie zur Verfügung stehen, schaltet der Wechselrichter automatisch auf Netzstrom oder einen möglichen angeschlossenen Generator um. 
 

Der Netzstrom fließt dabei in beide Richtungen. Sowohl in das öffentliche als auch in das eigene Hausnetz.

 

Optimierte Eigenutzung des Solarstroms

Typischer Tagesverlauf von Energieerzeugung und Energieverbrauch in einem Haushalt mit Photovoltaikanlage ohne Energiespeicher:

Nachts erzeugt die Photovoltaikanlage keinen Strom, weshalb die benötigte Energie aus dem öffentlichen Netz (a) bezogen wird.
Tagsüber geht überschüssig erzeugte Energie (c) verloren, da nicht die komplette Menge des Stroms selbst verbraucht (b) wird.

 

 

 

Typischer Tagesverlauf eines Haushalts mit PV-Anlage und Energiespeicher:

Tagsüber wird mit der überschüssigen Energie der Batteriespeicher aufgeladen (c). Nachts wird ein Großteil der nötigen Energie aus dem Energiespeicher bezogen (d).

Die PV-Energieausbeute (b) + (d) ist jetzt viel höher während der aus den Netz gekauft Anteil (a) viel geringer ist. Je nach Auslegung der Batterien kann der Energieverlust auf vernachlässigbare Werte sinken
 

 

 

---

Dachhalterung:

Das SolidRail / MultiRail Montagesystem für Photovoltaikanlagen ist für nahezu alle Eindeckungen geeignet. Dazu gehören Pfannen-, Biberschwanzziegel, Schiefer-, Trapezblech-, Wellfaserzement-, Wellblech- und auch Blechfalzeindeckungen. 

• Umfangreiches Montageschienensortiment, für unterschiedlichste Lastfälle
• Robust und statisch nachgewiesen
• Hohe Flexibilität für viele unterschiedlichste Spannweiten
• Einfach und bewährt

 

Flachdach-Aufständerung:


 

---

Multifunktionswechselrichter Solax Hybrid + Solax T-Bat H 5.8

 

---

Alle technischen Angaben ohne Gewähr. Irrtümer vorbehalten.

 

 

9480W solar system Solar10000-HV36 For self-consumption / feeding into your existing power grid incl. 6.1kWh storage and VDE-AR-N 4105 Total power/nominal power up to 9480Watt peak!

scope of delivery

24x 395W high-performance solar module 9.48kW peak power (TÜV/IEC/CE) quality module from Trina Solar monocrystalline half-cut (175x109x3.0cm) (latest technology!)

or optionally at no extra charge if available 370W monocrystalline (176x104x3.0cm) or 400W monocrystalline (172x113x3.0cm)

1x three-phase Hybrid Solax inverter 10kW X3-Hybrid-10.0-D G4 incl. ENS VDE-AR-N 4105 shutdown device, storable! and capable of emergency power! Integrated safety DC circuit breaker

1x USB stick for a WLAN interface (to read out the solar yield data via the supplied software)

High-voltage storage system from Solax 6.1kWh

2x Solax Triple Power battery T30
1x Solax Master Box MC0600 that manages the storage
1x 3-phase counter DTSU for communication

4x 15 meter high-performance solar cable 6mm² incl. pre-assembled MC4 connectors (other lengths also available)

operating manual Network application documents Declaration of Conformity Data Sheets Declaration of No Objection The legally required release device ENS VDE-AR-N 4105 is integrated in the inverter. (Legally required automatic switch-off)

The system can be expanded with a so-called EPS box, which automatically switches off the public grid in the event of a power failure and consumers can continue to be operated with the solar system and the storage tank. In this case, the solar system will continue to charge the storage tank.

The Wi-Fi Wireless Stick is used for efficient remote monitoring of PV systems. It collects information from the inverter, such as status and performance.

Storage: LiFePo4 storage Operating temperature: -30-+50°c Up to 6000 cycles Nominal capacity (kWh): 6.1 Usable capacity (kWh): 5.58 Charging and discharging power (kW): 6.1 Voltage (V): 204.8 Max Discharge Current (A): 60 Max. charge current (A): 60

Hybrid Inverter: - Can be operated completely independently with an additional EPS box in the event of a power failure - Safe & reliable with software and hardware protection - Efficiency max. 98.5%, Euro efficiency up to 98% of the inverter - Wide MPPT voltage range & Two independent MPP trackers - High protection class IP65 (indoor/outdoor use) - Multiple protections: over-voltage/under-voltage, grounding, anti-islanding, overload, over-temperature and RCD etc.

External overvoltage protection is recommended and can be ordered on request.

Available from Phoenix Contact or Raycap.

You will receive an invoice including VAT